March 3rd 2014 MDT
All,I have resigned from my position with Greater Media New Jersey to move back home to CA to take a job with CBS. With that comes 2 openings. My last day is 3/21/14 1. Greater Media New Jersey is looking for an Engineer for the 2 Morristown, NJ based Stations WDHA-FM & WMTR-AMGreat Company, Great People... Can't say a bad thing about the job only that NJ is not home for me... and home is calling... Feel free to reach out to me regarding the job or my Regional Manager, Keith Smeal at ksmeal@PROTECTED Link for job ...Continue Reading
February 26th 2014 MDT
You might want to look at the new Channel Master DVR. It costs $250. Standalone it does not have a lot of record capacity so don't let the DVR part throw you. It is compatible with Slingbox 500.I have the original HD Slingbox and it only accepts analog component video for HD which is not that common on basic tuners. http://www.channelmaster.com/Products_s/329.htm#DVR+http://www.slingbox.com/go/slingbox-500-techspecsIf that is too rich, consider an Aereo subscription and no hardware. https://aereo.com/?c=goog0 ...Continue Reading
February 26th 2014 MDT
You could try something like a DTV Pal Plus which is a DTV tuner popularly marketed by Dish / Echostar. I don't think there are new ones out there but I see several on Ebay for cheap like $10 to $25 or so with a remote control. There is a menu setup to configure it to stay on full time without timing out. The original DTV Pal had a discrete component tuner while the later DTV Pal Plus has a synthesized tuner. Depending of course on what type of output you need, e.g component ...Continue Reading
February 26th 2014 MDT
To the group: Would anyone have recommendations for a consumer grade ATSC tuner? The application does not justify the expense of a full-broadcast quality demod. The tuner will be used to receive 8VSB (not cable) to feed a Slingbox or similar arrangement. At this site, good sensitivity and good selectivity are a must. An IR remote would be a plus. I've used a number of NTSC tuners in the past but have no experience with ATSC tuners. Any recomendations would be much appreciated. &nb ...Continue Reading
February 25th 2014 MDT
ThanksSent from my iPadOn Feb 25, 2014, at 12:43 PM, George Evans <gevans@PROTECTED> wrote: Re: Argot studios FWIW...Working in Public Radio, I have them listed in my contacts under studios in case we need a studio in lower Manhattan, especially connecting to other studios or stations via ISDN. I have not worked with them but have considered them in the past.George Evans--Questions? Comments? Ideas? Suggestions? Let me know... George EvansDirector of Technical OperationsWFUV/Fordham Un ...Continue Reading
February 25th 2014 MDT
FWIW...Working in Public Radio, I have them listed in my contacts under studios in case we need a studio in lower Manhattan, especially connecting to other studios or stations via ISDN. I have not worked with them but have considered them in the past.George Evans--Questions? Comments? Ideas? Suggestions? Let me know... George EvansDirector of Technical OperationsWFUV/Fordham University441 East Fordham RoadKeating Hall, Room B12Bronx, NY 10458718-817-4550 - office718-365-9815 - faxgevans@PROTE ...Continue Reading
February 24th 2014 MDT
Anyone know these people? They are located near Madison SQ park. Sent from my iPad ...Continue Reading
February 20th 2014 MDT
Don’t forget to RSVP for tonights meeting…all the info is at www.sbe15.com 6pm at Clear Channel Radio32 Ave of the AmericasNY Jeff ...Continue Reading
February 19th 2014 MDT
Cool, thanks for the quick reply.Best,Jake Skiba, CTO(847) 323-3112jakeskiba@PROTECTED On Wed, Feb 19, 2014 at 11:17 AM, Jeff Smith <jeffsmith@PROTECTED> wrote: SCMS will but NewTek was unable to reschedule…so Burk will be here instead______ __ *From:* jakeskiba@PROTECTED [mailto:jakeskiba@PROTECTED] *Sent:* Wednesday, February 19, 2014 10:58 AM*To:* sbe15*Subject:* [sbe15ny] RE: 2/13 meeting is now 2/20____ __ __Jeff,Will SCMS and NewTek be in attendance? Thanks,Jake Skiba, CTO(847) 323-3112jakes ...Continue Reading
February 19th 2014 MDT
SCMS will but NewTek was unable to reschedule…so Burk will be here instead *From:* jakeskiba@PROTECTED [mailto:jakeskiba@PROTECTED] *Sent:* Wednesday, February 19, 2014 10:58 AM*To:* sbe15*Subject:* [sbe15ny] RE: 2/13 meeting is now 2/20 Jeff,Will SCMS and NewTek be in attendance?Thanks,Jake Skiba, CTO(847) 323-3112jakeskiba@PROTECTED*From: *"Jeff Smith" <jeffsmith@PROTECTED> *Date: *Wed, 19 Feb 2014 08:43:26 -0700*To: *sbe15<members@PROTECTED>*ReplyTo: *"sbe15" <members@PRO ...Continue Reading
Start a new thread, email: members@sbe15.com
The entire membership of SBE 15...or at least the email addresses we have :)
By subscribing to the sbe15 mailing list you agree to allow SBE 15 to use your email for internal emailings only.Your email address will not be shared with any 3rd party.